驱动电压:无源 发声原理:电磁式 电极引方式:贴片式
A. SCOPE
This specification applies magnetic buzzer, SMD8530F-3627
B. SPECIFICATION
No. |
Item |
Unit |
Specification |
Condition |
1 |
Oscillation Frequency |
Hz |
2730 |
Vo-p=1/2duty , square wave |
2 |
Operating Voltage |
Vo-p |
2.5 ~ 4.5 |
|
3 |
Rated Voltage |
Vo-p |
3.6 |
|
4 |
Current Consumption |
mA |
MAX. 100 |
at Rated Voltage |
5 |
Sound Pressure Level |
dB |
MIN. 85 |
at10cmat Rated Voltage |
6 |
Coil Resistance |
Ω |
16±3 |
|
7 |
Operating Temperature |
℃ |
-20 ~ +60 |
|
8 |
Storage Temperature |
℃ |
-30 ~ +80 |
|
9 |
Dimension |
mm |
8.5 x 8.5 x H3.0 |
See appearance drawing |
10 |
Weight (MAX) |
gram |
0.8 |
|
11 |
Housing Material |
|
LCP( Black ) |
|
12 |
Leading Pin |
|
Tin Plated Brass(Sn) |
See appearance drawing |
13 |
Environmental Protection Regulation |
|
RoHS |
|
C. APPEARANCE DRAWING
Tol : ± 0.3 Unit: mm
D.TESTING METHOD
Standard Measurement conditions
Temperature:25±2℃ Humidity:45-65%
Acoustic Characteristics:
The oscillation frequency, current consumption and sound pressure are measured by the measuring instruments shown below
In the measuring test, buzzer is placed as follows:
E. Typical Frequency Response Curve
F. Recommend Driving Circuit
The base current Ib should high enough so that it saturates the collector current of the transistor with the CB load.
G. Soldering Condition
(1)Recommendable reflow soldering condition is as follows
(Reflow soldering is twice)
Note:It is requested that reflow soldering should be executed after heat of product goes down to normal.
Heat resistant line
(Used when heat resistant reliability test is performed)
(2)Manual soldering
Manual soldering temperature 350 oC within 5 sec.
H. RELIABILITY TEST
TEST CONDITION.
Standard Test Condition : a) Temperature : +5 ~ +35℃ b) Humidity : 45-85% c) Pressure : 860-1060mbar
Judgment Test Condition : a) Temperature : +25 ±2℃ b) Humidity : 60-70% c) Pressure : 860-1060mbar
I. PACKING STANDARD